User Safety
The equipment you have purchased complies with the following European Directives
EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC as indicated in the EC
Declaration of Conformity included in the document. This instrument has been designed
and constructed in a manner which minimises the risk of electrical shock to the operator,
offers maximum protection from overheating and provides clear and adequate labelling of
instrument controls.
Do not touch any electrical contacts or open any closure plates.
RISK OF ELECTRIC SHOCK!!
DO NOT:
1. Block ventilation slots during use.
2. Use metal instruments or scouring agents to clean the interior of the oven.
3. Install the instrument outside, in damp environments or areas which can be fl ooded.
4. Install the instrument near fl ammable or volatile substances, acids or in corrosive
environments.
5. Store infl ammable or volatile substances inside the instrument, touch live parts of the
instrument, operate the instrument with damp hands, place vessels containing fl uids
on the instrument, climb or place any objects on the instrument.
6. Do not use without appropriate training.
DO:
1. Ensure the mains switch and power supply connector are accessible during use.
2. Disconnect from the power supply before moving the instrument.
3. Ensure that the mains supply cord fi tted is replaced with an equivalent type if
damaged.
4. Follow the installation instructions.
5. Follow the operating and maintenance instructions. If the instrument is not used in
accordance with these instructions, then basic safety protection offered by the equip-
ment may be affected.
6. Always follow good laboratory practice by ensuring substances being heated present
no risk of hazard (explosion, implosion or release of toxic or fl ammable gases).
!
CLIFTON RANGE DRYING OVEN NE9 SERIES
4
