background image

4

         LCD SMART BATTERY CHARGER & MAINTAINER

  WARNING – RISK OF EXPLOSIVE GASES

Working in the vicinity of a lead-acid battery is dangerous. Batteries 

generate explosive gases during normal battery operation. For this 

reason, it is of the utmost importance that you follow the instructions  

each time you use the charger.

PERSONAL PRECAUTIONS:

    

Consider having another person close by when working with a  

lead-acid battery.

    

Have plenty of fresh water and soap in case battery acid encounters 

eyes, skin or clothing.

    

Wear complete eye and clothing protection. Avoid touching eyes while 

working with a battery.

    

If battery acid contacts skin or clothing, wash immediately with soap 

and water. If acid enters the eye(s), flood eye(s) with running cold water 

for at least 10 minutes and get immediate medical attention.

    

Never smoke or allow a spark or a flame in the vicinity of a vehicle 

battery, engine, or a battery charger.

    

Take precautionary measures to avoid dropping a metal tool onto a 

battery. It is possible that it will spark, or short circuit the battery or 

other electrical parts that may cause an explosion.

SAFETY INSTRUCTIONS

Содержание C-BCH-0004

















Отзывы: