11
CHARGING
We recommend fully charging the speaker before its first use to maximize the battery’s
lifespan. The speaker takes approximately 5 hours to fully charge. Low battery is announced
by an audible signal. To charge the speaker’s battery connect the enclosed micro USB cable
to the charging port (10) and connect to any charging adapter (voltage 5V and output current
minimum of 1A) or to a USB port on your PC. You can follow the charging progress thanks to
the 2 charging LED diodes (3), after a full charge is complete both diodes will go out.
POWERING ON/OFF
Press and hold button (4) for 3 seconds to power on/off the speaker. Powering on and off is
announced via an audio signal.
CONNECTING TO BLUETOOTH
1. The speaker is ready for Bluetooth connection from the moment it is powered on. Pairing
mode is signalled by the LED diodes (3) flashing blue.
2. Activate Bluetooth on your own device. Select “Niceboy RAZE 3 radion” from the list of
available devices.
3. Your device will connect to the speaker. Successful pairing is announced by an audio signal
and flashing of the LED diodes (3) at five second intervals.
*Once powered on again, the speaker will automatically connect to the device with which it
was last paired.
PLAYBACK
Play or pause tracks by pressing button (6). Press and hold the volume controls, located on
buttons (1) and (2) to change volume. Press the volume up button to jump to the next track
and the volume down button to jump to the previously played track.
