Niceboy RAZE 2 vertigo, Руководство пользователя

Страница: 12 / 38

12
AUX PLAYBACK
1. Connect the attached 3.5mm jack cable to the audio input (8); the speaker automatically
switches to the appropriate mode.
2. Use the device connected to the speaker to control playback. Speaker volume can be
controlled by pressing the buttons (3) and (4).
TRUE WIRELESS (TWS) CONNECTION
True Wireless (TWS) technology can be used to connect two Niceboy RAZE 2 vertigo speakers
for simultaneous playback.
1. Switch on both Niceboy RAZE 2 vertigo speakers and make sure that they are not
connected to any Bluetooth device (a mobile phone, notebook, etc.).
2. Press the button (5) on one of the speakers. The operating LED (6) starts flashing blue
and white. An audio signal indicates that the speakers are successfully connected; the
LED on one speaker flashes white and on other it flashes blue.
3. Now you can open the Bluetooth settings on your device. Use the list of available devices
and select “Niceboy RAZE 2 vertigo“. If you are asked to enter a password, use “0000“
(four zeros). Successful pairing will be indicated by an acoustic signal and both LEDs will
be lit.
To disconnect the speakers, press the button (5). To delete the connection record, press and
hold the same button.
TELEPHONE CALLS
To accept and subsequently end a call, press the button (7). By pressing and holding the
same button the incoming call can be denied. To transfer the call from the speaker to your
mobile phone while the call is still connected, press and hold the button (7).
EN