Niceboy RAZE 2 vertigo, Руководство пользователя, Страница: 11 / 38

11
CHARGING
Before first use, we recommend fully charging the speaker to maximize the battery service
life. Full charging takes approximately 3 hours. Low battery is indicated by an audio signal
and the speaker then switches to energy saving mode with reduced volume to maximize the
battery life.
To charge the speaker battery, connect the supplied microUSB cable to the charging port
(9) and to any charging adapter (5V; output current minimum 1A) or to a PC USB port. The
charging process is indicated by the white charging LED (2); when fully charged, the LED light
is switched off.
SWITCHING ON / OFF
To switch the speaker on / off, press and hold the button (1) for three seconds.
BLUETOOTH CONNECTION
1. Press and hold the on/off button (1) for three seconds to switch on the speaker. The
speaker is now in pairing mode for Bluetooth connection. Pairing mode is indicated by
the operating LED (6) flashing.
2. Activate Bluetooth on your device. Use the list of available devices and select “Niceboy
RAZE 2 vertigo“. If you are asked to enter a password, use “0000“ (four zeros).
3. The device connects to the speaker. Successful pairing is indicated by an audio signal
and the operating LED (6) comes on.
To reset the Bluetooth connection, press and hold the button (7).
PLAYBACK
A track can be played or paused by pressing the button (1). Volume is controlled by pressing
the buttons (3) and (4). By pressing and holding the same buttons, it is possible to move to
the next or previous track.
EN