Nice HOPP HO7124, Инструкция по эксплуатации

Страница: 7 / 36

ENGLISH – 7
3.5 INSTALLING THE GEARMOTOR
a
Incorrect installation may cause serious physical
injury to the person working on the system or to its
future users.
Before starting to assemble the automation, com-
plete the preliminary checks described in the “Pre-
installation checks” and “Product usage limits”
paragraphs.
To install HOPP :
1. measure the distance ( A )
A
7
2. move the leaf to the desired maximum opening position
and check the resulting opening angle
3. with the value of distance ( A ) and the opening angle
found, using the graph to determine the distance ( B ). For
example: if ( A ) is 100 mm and the desired angle is equal
to 100°, distance ( B ) will measure roughly 180 mm
90°-95°
95°-100°
100°-105°
105°-110°
300 250 220 200 170 150 130 110
0
50
100
A
B
150
200
250
8
B
9
4. use the fixing bracket ( C ), in the horizontal position, as a
template to determine the position of the four fixing holes
B
C
10
5. drill the bracket in the marked positions
11
6. attach the fixing bracket ( C ) of the gearmotor to the wall
using adequate wall plugs, screws and washers (not sup-
plied)
x 4
C
12