Nice FILO 400, Упрощенная инструкция

Страница: 12 / 36

2 – English
English
A
1
DIMENSIONS (A) FILO 400 FILO 600
Weight up to: 400 kg 600 kg
Leaf length
5.5 m 7 m
If one of the above limitations is not fulfilled, you should contact our technical assistance service.
2.1 - LIST OF CABLES
D D
A
FL200
PH200 PH200
FILO400C
FILO600C
CR502
B
C
A B C D =
Refer to Table 1
2
TABLE 1 - Types of electrical cables
Connection Type of cable Maximum admissible length
A
230 VAC 50/60 Hz power supply
(250 Vca in version AU01)
3 x 1.5 mm² cables 30 m (note 1)
B Warning light output 2 x 0.5 mm² cables 20 m
C Radio aerial RG 58 shielded cable below 5 m
D
Photocells 2 x 0.5 mm² or 1 mm² cables 20 m
The cables used must be suited to the type of installation. For example, we recommend using an H03VV-F cable for internal installation
or an H07 RN-F cable for external installation.
Note 1:
it is possible to use a power cable longer than 30 m provided that it has a larger cross-sectional area (for example, 3 x 2.5 mm²), like when an
earth connection must be made near the device.
Note 2: for the ECS cables of the LM 100 bus, there are no particular issues associated with the use of a single cable that includes multiple connections.
Note 3:
the Stop and SbS inputs can be connected with a single 4 x 0.5 mm² cable.
2
LIMITATIONS OF USE
3
POSITIONING AND FASTENING
3.1 - POSITIONING AND FASTENING THE MOTOR
01.
Verify that the surface of the gate leaf is suitable for accommodating
the fastenings for positioning the rack. The fastening points must be
situated 65 mm above the ground (Fig. 3).
3