Nice BiDi-WiFi, Инструкции и предупреждения для установщика

Страница: 4 / 6

4 – ENGLISH
–
insert BiDi-WiFi into the IBT4N connector ( B ) of the control unit
(“ Figure 5 “)
B
5
a
Caution! If BiDi-WiFi is inserted incorrectly, it may
permanently damage the control unit!
–
power the automation’s control unit (“
Figure 6
“)
ON
6
–
Wait for the Data Connection LED ( A ) to start flashing (“ Figure
7
“)
–
configure BiDi-WiFi through smartphone application MyNice
Pro , following the instructions contained in the relevant instruc-
tion manual that can be downloaded from this "link" .
–
the configuration is complete when Data Connection LED (
A
) is
fixed green (“ Figure 7 “).
A
7
LED SIGNALS
4
4 LED SIGNALS
In the event of
BiDi-WiFi
malfunctions, the LEDs(
A
) and (
D
) can
light up or start flashing. (“
Figure 8
“).
A
D
8
The “ Table 1 ” shows the meanings of the LED signals.
Table 1
LED SIGNALS
Status
Data
Connection
LED (A)
Status
Power LED (D) State duration Description
OFF
OFF Fixed
BiDi-WiFi
off.
Lit green Lit green Fixed
BiDi-WiFi
configured and
smartphone
connected.
Lit orange Lit green Fixed
BiDi-WiFi
configured but
smartphone not
connected.
Flashing
green
Lit green Fixed
BiDi-WiFi is
not configured.
Use smartphone
application to
perform the
accessory
configuration.
OFF Lit green Fixed
BiDi-WiFi
was
not configured
within 30 minutes
of switching on.
Switch off and
on the accessory
to retry the
configuration.
Flashing
orange
Flashing
orange
Transitory
(about 1
minute)
BiDi-WiFi update
in progress.
- Lit red Fixed
System error.
Contact the
Nice
Technical
Assistance.
Lit red
- Fixed
Wi-Fi module
error. Contact the
Nice Technical
Assistance.
Flashing red - Fixed
Configuration
error. Contact the
Nice Technical
Assistance.