6.2 - Other signals
Table A22 - other LED signals
Color
Description
2 red flashes
Control unit initialized properly
3 red flashes
Transmitter memorized in Mode I
3 orange flashes
Transmitter memorized in Mode II
6 red flashes
Memory for transmitters full (Mode I)
6 orange flashes
Memory for transmitters full (Mode II)
3 yellow flashes
Transmitter deleted from memory
5 yellow flashes
Control unit restored to factory settings
7
TECHNICAL SPECIFICATIONS
The product BiDi-Shutter is produced by Nice S.p.a. (TV). Warnings: - All technical specifications stated in this section refer to an ambient
temperature of 20 °C (± 5 °C) - Nice S.p.a. reserves the right to apply modifications to the product at any time when deemed necessary, while
maintaining the same functionalities and intended use.
BiDi-Shutter
Type
in-wall/flush box mounted control unit for tubular motors
Power supply
100–240 V AC, 50/60 Hz
Motor rated current
2 A
Motor rated power
480 VA for Vn = 240 V; 460 VA for Vn = 230 V; 240 VA for Vn = 120 V; 200 VA for Vn = 100 V
Recommeded wires cross-section
0.5–
4
mm
2
for 1 wire; 0.5–
1.5
mm
2
for 2 wires
Required circuit breaker
Compliant with IEC/EN 60898-1; Curve code: B; Rated current: up to 16 A;
Breaking capacity: 6 kA; Rated insulation voltage: 500 V;
Rated impulse withstand voltage: 4 kV;
Casing protection rating
IP 20
Operating temperature
0–35 °C
Dimensions (mm)
45 x 36 x h 23
Weight
20 g
Radio transceiver
Frequency band
433.05–434.04 MHz
Code
OPERA/FLOR (rolling code), PLN2+ (rolling code)
No. of memorisable transmitters
30, including climatic sensors
Transceiver range
Estimated at 150 m in open space and 20 m inside buildings (*)
Max. transmit power
10 dBm
(*) The transceiver range is strongly influenced by other devices operating at the same frequency with continuous transmission, such as alarms
and radio headphones which interfere with the control unit transceiver.
8
PRODUCT DISPOSAL
This product is an integral part of the automation and therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be performed by qualified personnel. This
product is made of various types of material, some of which can be recycled while others must be scrapped. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this product category.
Caution!
– some parts of the product may contain pollutant or hazardous substances which, if disposed of into the environment, may cause
serious damage to the environment or physical health.
As indicated by the symbol alongside, disposal of this product in domestic waste is strictly prohibited. Separate the waste into categories for dis-
posal, according to the methods envisaged by current legislation in your area, or return the product to the retailer when purchasing a new version.
Caution!
– local legislation may envisage serious fines in the event of abusive disposal of this product.
9
DECLARATION OF CONFORMITY
Hereby, NICE S.p.A., declares that the radio equipment type BiDi-Shutter is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.niceforyou.com/en/support
