12
– English
English
3.3.7 –
lectrical connections to t e V
control unit
1
Open the cover by undoing bolt
[A]
(Fig. 38) and pressing button
[B]
(Fig. 39).
2
Remove the circular part
[C]
ith a scre driver, as in fig. 40.
3
Cut the rubber membrane
[D]
(Fig. 41) so as to route the cable through
it and fit it in hole
[C]
(Fig. 40).
4
Use Fig. 42 and the connection description in Table 6 as refer-
ence.
• if using the PHR00 photocells, remove the small piece of wire between
terminals 3 and 7 and make the connections as in Fig. 42.
• if using the flashing light aerial, remove the piece of ire, hich is con
-
nected to terminal 2, and connect the RG58 type shielded cable.
5
When the connections have been completed, secure the cables using
suitable clamps.
6
To close the cover, turn and push until a click is heard. Tighten down
screw
[A]
.
40
C
41
D
38
A
B
39
NC
NO
TX
RX
1
2
3
4
5
6
7
8
9
1
1 2 3 4 5
2
10
42
PHR00
FL200
