NIC-600-2233-06
10
The row width of printing is being interlocked with a setup of Table screen. If the row width at the
time of printing is narrow, please adjust on the screen. And, the row will not be printed if width of
a row is made into zero.
10. Termination
(
１
) Press the upper right button of MA3win.
(
２
) Close the Windows and turn off the power of PC and Printer.
(
３
) Power off MA-3000.
(４)
Discharge liquid of a drain tank.
(
５
) Close the main cock of the Oxygen gas cylinder.
*
If you don’t turn-on MA-3000 for a long time, the sample heating tube might be obstructed by
moisture absorption.
・
If you don’t turn-on MA-3000 more than 2 weeks, please turn on the MA-3000 power switch and do
conditioning. (Conditioning process start automatically after checking the flow path)
・
Otherwise, please dismount the sample heating tube and store it in a desiccator to prevent moisture
absorption.
11. Errors and warning
Measurement can continue even if a warning message has been displayed. However, if an error
message is displayed, measurement will be disabled until the cause of the error has been solved.
Please check messages and contact our service.
Low
HIGH
Number
of profile
