Nibe VVM 500, Руководство по установке

Страница: 62 / 72

Technical specifications
3 x 400 V
Electrical data
9 kW Additional power
400 V 3N~50 Hz Rated voltage
16.2 A Max operating current
16 A Fuse
3 – 76 W Output, Heating medium pump
3 – 76 W Output, charge pump
IP21 Enclosure class
Heating medium circuit
low energy Energy class circ-pump
low energy Energy class charge pump
0.3 (3 bar) MPa Max system pressure heating medium
500 l/h Min flow
70 °C Max HM temp
Pipe connections
int. G25 Heating medium, CU pipe
ext. G25 Hot water connection
int. G25 Cold water connection
int. G25 Heat pump connections
Miscellaneous
Indoor module
22.8 l Volume hot water coil
500 l Volume, total indoor module
80 l Volume buffer vessel
2 l Volume, solar coil
1.0 MPa Cut-off pressure, hot water coil
(10 bar)
0.3 (3 bar) MPa Max permitted pressure in indoor module
Capacity hot water heating According to EN 16147
390 litre Amount of hot water (40 °C)*
Dimensions and weight
760 mm Width
900 mm Depth
1,900 mm Height
2,000 mm Required ceiling height
240 kg Weight (excl packaging)
Part no.
069 400 Part no.
*Applies in the case of normal comfort mode, tap flow 8 litres/minute and incoming cold water 10 °C. Increased hot water comfort can be obtained at lower
tap flow.
NIBE VVM 500 Chapter 12 | Technical data 62