Nibe SOLAR FP215 P, Руководство по установке

Страница: 38 / 76

NOTE
The minimum number of mounting points only cover
a part of the potential wind and snow load.
Mounting points are adapted to the local conditions.
1. Dimensions for the solar panel’s mounting
Mounting of roof connections is carried out in the same way
as previously.
The drilling diagram for mounting points for up to 4 solar
panels is as follows:
Size:
A: 2000 mm
B: 1875 mm
C: 1825 mm
D: 300 mm
E: 582 mm. 642 mm
The mounting system must be installed as illustrated. Otherwise
the mounting rail joint connections and brackets can collide.
If a connection cannot be made where the solar panel should
sit in the installation, the mounting rail and the joint connec-
tions should be pre-installed and aligned before they are
mounted on the roof.
A
B B
B C B
B C C B
E
D
D D
D D
D
Row distance
The distance between the solar panels (a) depends on the
shadow angle
˞ and the pitch of the roof ˟ and the pitch angle
ˡ .
If two or more rows of solar panels are to be placed directly
behind each other and if the shadow angle is constant 20°,
the optimal distance between the rows can be read off in the
following table:
Row distance a
Stand angle ˡ = 25° Stand angle ˡ = 35° Stand angle ˡ = 45° Roof pitch ˟
3200 mm 3350 mm 3700 mm 0°
2550 mm 2500 mm 2700 mm 10°
2190 mm 2100 mm 2150 mm 20°
1950 mm 1800 mm 1800 mm 30°
1880 mm - - 40°
SOLAR FP215 P/PL Chapter 4 | Mounting 36