Nibe PV Solar, Руководство по установке, Страница: 13 / 28

Installing the mounting bracket for installing
solar panels on seamed metal roofs
LEK
Bolt M10
Washer
Mounting
L profile
Nut M10
1. Install the mounting on the roof according to the
usual rules and practice
2. Install the L profile with M10 bolt, washer and nut.
Installing the mounting bracket for installing
solar panels on felt roofs
x 10
LEK
LEK
Screw
Coach bolt M10
1. Install the plate on the roof according to the usual
rules and practice.
x 10
LEK
LEK
Coach bolt M10
Flashing tape
Rubber washer
L profile
Nut M10
2. Install the L profile on the protruding coach bolt with
M10 nuts.
Caution
The coach bolt should be installed from under-
neath before the plate is mounted on the roof.
Caution
Never use the installed roof brackets as a lad-
der.
Installing the mounting rails
Mounting rails are secured in the roof brackets with T
bolts and locking nuts (8 mm).
Caution
Check that the head of the T-bolt is vertical in
the mounting rail after tightening.
The rectangular hole in the roof bracket permits optimal
height adjustment of the mounting rail.
Adjustment of the mounting rail height
Adjust the first mounting rails installed in relation to each
other and the roof cladding. Then fix the mounting rail
to the roof bracket by tightening the nut. Tightening
torque 12-15 Nm.
13 Chapter 4 | Mounting
NIBE PV Solar cell pack-
age