Nibe PV Solar, Руководство по установке, Страница: 10 / 28

Installing solar panels
in several groups
Examples of possible combinations per ten panels:
To reduce the risk of damage to the electric cables
between the groups of solar panels, these can be run
underneath the roof tiles or ceiling. To prevent moisture
penetrating under the roof tiles or through the damp
barrier at the holes for the electrical cables, diffusion
sealed lead-ins must be fitted.
Specially adapted roof brackets for tiled roofs, sheet
metal roofs, felt roofs or seamed sheet metal roofs. The
type of roof bracket to be used must be specified at the
time of ordering.
Caution
Additional connectors and mounting materials
may be required to install solar panels in differ-
ent groupings.
MOUNTING
Each package can be expanded with additional panels,
or you can choose not to install some panels.
This means that you have extremely good flexibility, al-
lowing attractive roof installation.
If you need a larger installation, it is perfectly possible
to expand it. In this case, you simply select multiples of
e.g. 24 kW, producing an installation of e.g. 240 kW.
This can be done easily thanks to the modular system,
and you will then need 10 x 8 basic kits, 10 x inverters
and 10 x 8 sets of roof brackets.
Material
If the panels are installed in formations other than that
shown in the example, additional mounting materials
may be required. To order additional components or in-
stallation materials, contact:
NIBE AB Sweden
Box 14, Hannabadsvägen 5
SE-285 21 Markaryd
Tel: (+46)(0)433 73 000
info@nibe.se
Example
6 kW package installed on roof that is expanded by e.g.
four solar panels (7.2 kW)
LEK
LEK
LEK
LEK
6 kW package installed on roof where you have decided
not to install e.g. two panels (5.4 kW).
LEK
LEK
NIBE PV Solar cell pack-
age Chapter 4 | Mounting 10
4 Mounting