Nibe NV 10, Руководство по установке, Страница: 6 / 24

Important information
SAFETY INFORMATION
This manual describes installation and service proced-
ures for implementation by specialists.
The manual must be left with the customer.
SYMBOLS
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should consider when installing
or servicing the installation.
MARKING
The CE mark is obligatory for most products sold
in the EU, regardless of where they are made. CE
Danger to person or machine.
!
Read the Installer Manual.
General
The level monitor NV 10 is used when the local condi-
tions or regulations require an extended check of the
brine circuit.
MOUNTING
Install as follows:
• Screw the level monitor into the opening in the level
vessel
• In certain cases, this may be too narrow for the float.
Widen the opening using a knife. Check that no swarf
falls into the brine.
NOTE
Care must be exercised when the sensor pipe
is inserted in the level vessel. The lock rings
that mark the float's upper and lower limits
must not be moved.
LEK LE
K
Till nivåvakt
Till lågtryckspressostat Från displaykort
Svart kabel,
märkt 1.55
Äldre bild
Level vessel, level monitor NV 10 and safety valve
COMPATIBLE PRODUCTS
• S1155
• S1255
NV 10 | GB 6
English