Nibe HA-WH5 F, Руководство по установке, Страница: 17 / 24

Filling and venting
Filling the hot water heater
1. Open a hot water tap in the house. (XL4)
2.
Fill the hot water heater through the cold water
connection (XL3).
3.
When the water that comes out of the hot water tap
is no longer mixed with air, the water heater is full.
and the tap can
be closed.
Filling and venting the charge coil
Filling and venting
1. Open the g valve (external, not included with the
product). Fill the coil in the hot water heater and the
rest of the climate system with water.
2.
Vent the coil of the climate system via
the relevant venting valves.
3. Keep topping up and venting until all air has been
removed and the pressure is correct.
The e shows Mega Coil 160, 200 and 300
Chapter 6 | Commissioning and adjusting 17
6 Commissioning and adjusting
and the rest
Flush the system for several minutes
Cold inlet
XL3
XL4