Nibe FIGHTER 2010 Series, Инструкция по установке и обслуживанию

Страница: 23 / 36

Control 21
For the Installer
FIGHTER 2010
22 Shows the number of compressor starts for stage
1, accumulatively.
23 Shows the number of compressor starts for stage
2, accumulatively.
24 Shows the operating hours for the compressor’s
stage 1, accumulatively.
25 Shows the operating hours for the compressor’s
stage 2, accumulatively.
26 Shows the operating hours for connected addi-
tional heat, accumulatively.
27 Shows the compressor status.
00 Compressor off.
01 Compressor stage 1 on.
02 Compressor stage 2 on.
XX Compressor blocked due to an alarm.
nn Compressor starts in nn minutes.
28 Continuous operating time in compressor stage 2
before activation of additional heat. Adjustable
between 0 and 120 minutes. Factory setting 120
minutes.
29 Measured temperature on the return sensor.
30 Max return temperature. Adjustable between 25
and 50 °C. Factory setting 45 °C.
31 Connection difference return temperature. Adjust-
able between 0 and 10 °C. Factory setting 2 °C.
32 Measured temperature on the flow sensor.
2 1 1 / 1 / 1
High pressure pressostat
(HP)
Low pressure pressostat
(LP)
Motor protection
(MS)
21 Alarm input status (HP, LP and MS), 1 indicates
the input is OK.
Channel description
2 0 1 / 1
If position (1), double step thermostat is select-
ed on channel 13
Hot water thermostat
Single step thermostat/
return sensor
2 0 1 / 1 / 1
Hot water thermostat
Double step
thermostat, step 2
Double step
thermostat, step 1
If position (2), SMO 10/VVM 240 is selected on
channel 13
2 0 1
Address for communication with SMO 10. This
should be selected so that each FIGHTER 2010 in
the system has a unique address (19) for communi-
cation with SMO 10.
For example, three FIGHTER 2010s in the same
system give the addresses 1, 2 and 3.
The FIGHTER 2010 that produces hot water should
be set on 1.
The address should be set to “1” when communicat-
ing with VVM 240.
20 Control inputs/address options.
If position (0), auto mode is selected on chan-
nel 13
Active input indicated by 1.
Deactivated input indicated by 0.
Active input indicated by 1.
Deactivated input indicated by 0.
Address
(between 1–9)