NI VXIpc-882 Installation Guide
8
ni.com
your operating system onto your hard drive through an external
DVD/CD-ROM. For more information on these tools, refer to the
documentation on your hard drive in the
c:\Images\Recovery
directory
or KnowledgeBase 2ZKC02OK at
ni.com/support
.
Note
Your system hot key is <F4>. To access the hard drive-based recovery tool, press and
hold <F4> when video first appears during the boot process.
If you need to recover your factory-installed operating system from a CD,
you can use the included OS re-installation CD with an external CD-ROM
drive such as a USB CD-ROM drive. Boot the VXI controller using the
OS re-installation CD to recover the OS. You also may need to reinstall
other software after using the CD to recover the OS.
Note
Recovering the OS erases the contents of your hard disk. Back up any files you want
to keep.
My CMOS is corrupted. How do I set it back to default?
1.
Enter the BIOS setup program as described in the
NI VXIpc-882 User
Manual
.
2.
Press <F9> to load BIOS default
s
.
3.
Answer
Y
(Yes) to the verification prompt.
4.
Select
Save and Exit Setup
.
I can’t change the display on the controller from 640
×
480 to 800
×
600.
What’s wrong?
Be sure the video driver is installed. If it is not, see the
Drivers.txt
file
on the hard drive or recovery CD-ROM.
Where to Go for Support
The National Instruments Web site is your complete resource for technical
support. At
ni.com/support
you have access to everything from
troubleshooting and application development self-help resources to email
and phone assistance from NI Application Engineers.
A Declaration of Conformity (DoC) is our claim of compliance with
the Council of the European Communities using the manufacturer’s
declaration of conformity. This system affords the user protection for
electromagnetic compatibility (EMC) and product safety. You can obtain
the DoC for your product by visiting
ni.com/certification
. If your
product supports calibration, you can obtain the calibration certificate for
your product at
ni.com/calibration
.
