NI USB-9263 User Guide and Specifications
6
ni.com
LED Indicator
The NI USB-9263 device has a green LED next to the USB connector. The
LED indicator indicates device status, as listed in Table 1. When the device
is connected to a USB port, the LED blinks steadily to indicate that the
device is initialized and is receiving power from the connection.
If the LED is not blinking, it may mean that the device is not initialized or
the computer is in standby mode. In order for the device to be recognized,
the device must be connected to a computer that has NI-DAQmx installed
on it. If your device is not blinking, make sure your computer has the latest
version of NI-DAQmx installed on it, and the computer is not in standby
mode.
Wiring the NI USB-9263 Device
Caution
A high voltage screw terminal backshell must be installed when using hazardous
voltages (>42.4 V
pk
, 60 VDC).
Note
Table 2 illustrates the accessories available from
ni.com
for use with the
NI USB-9263.
Table 1.
LED State/Device Status
LED State
Device Status
Not lit
Device not connected or in suspend.
On, not blinking
Device connected, but no module installed.
Single-blink
Operating normally.
Double-blink
Connected to USB Full-Speed port. Device
performance might be affected. Refer to the
section for more information.
Quadruple-blink
Device error. Refer to
ni.com/support
.
Table 2.
Accessories
Accessory
Accessory Description
NI 9932
10-position strain relief and
high-voltage connector
NI 9936
10 screw-terminal plugs
