©
National Instruments Corporation
5
NI USB-9263 User Guide and Specifications
3.
Align the I/O module with the carrier, as shown in Figure 5.
Figure 5.
Module Installation
4.
Squeeze the latches and insert the NI 9263 module into the
NI USB-9162 carrier.
5.
Press firmly on the connector side of the NI 9263 module until the
latches lock the module into place, as shown in Figure 6.
Figure 6.
Locking Module into Place
Connecting the NI USB-9263 to a Computer
Plug one end of the USB cable into the NI USB-9263 and the other end into
an available USB port on the computer. Refer to the
NI-DAQmx for USB
Devices Getting Started Guide
that shipped with your device, and is also
accessible from
Start»All Programs»National Instruments»NI-DAQ
,
for more information.
1
High Voltage Screw Terminal Backshell
1
