INSTALLATION INSTRUCTIONS
NI SCXI -1333
Terminal Block for the NI SCXI-1129
This guide describes how to install and connect signals to the
National Instruments SCXI-1333 terminal block to configure the
SCXI-1129 switch module as a quad 4
×
16 matrix.
You can use the SCXI-1333 with the SCXI-1129 to create four,
4
×
16 matrices. The SCXI-1333 is a general-purpose terminal block
that gives you access to all row and column connections. Because of
the general-purpose nature of this terminal block, you can combine the
rows and/or columns to create many different matrix configurations.
Spring terminals on the SCXI-1333 allow you to access each 4
×
16 matrix.
The SCXI-1333 provides terminals for scanner advanced output and
external input trigger signals and contains two 128-pin DIN connectors
for connecting columns between modules.
Refer to the
NI Switches Getting Started Guide
to determine when to install
the terminal block. Visit
ni.com/switches
for information on other
switching solutions.
Conventions
The following conventions are used in this guide:
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
™
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
