NI SCXI-1333 Installation Instructions
4
ni.com
6.
Use a flathead screwdriver to press the spring tab of a spring terminal.
Insert the stripped end of the wire fully into the spring terminal.
Release the spring tab to secure the wire. No bare wire should extend
past the spring terminal. Exposed wire increases the risk of a
short-circuit causing a failure.
7.
Connect the safety earth ground to the safety ground lug.
8.
Tighten the two screws on the strain-relief assembly to secure the
cables.
9.
Reinstall the top cover.
10. Replace the top cover screw.
Figure 1.
SCXI-1333 Top Cover Diagram
1
Top Cover
2
Top Cover Screw
1
2
