NI SCXI-1127, Руководство пользователя

Страница: 17 / 44

Chapter 1 Installing and Configuring the SCXI-1127
1 2 -Slot HVAB-Backplane
3
1-Slot HVAB-Backplane
5 NI 4060 for PCI
Adapter Adapter
6 SH9MD-9MD Cable
2 8 -Position HVAB Plug 4
HV8-BAN4 Cable 7 4-Slot SCXI Chassis
IILII
00000110000\ 000110 DOM
00 0.0000 000 ORO
ABO+
ABO—
AB2+
A B 2 -
111 111 11 1111 11111 111 .1 11 1 1 1111
Figure 1-3. 4-Slot Configuration Parts Locator Diagram
1. I n s t a l l the 2-slot HVAB-backplane adapter behind slots 3 and 4.
2. I n s t a l l additional 1-slot HVAB-backplane adapters behind slots 1
and 2 if needed.
3. I n s t a l l the 8-position HVAB plugs to connect the HVAB-backplane
adapters as needed.
4. Connect the HV8-BAN4 cable from the DMM to the HVAB connector
behind slot 4.
5. Connect the SH9MD-9MD cable from the DMM to the AUX IN
connector.
6. Y o u can install any additional SCXI-1 127 modules in any slot that has
an HVAB-backplane adapter behind it.
[.{ ' N o t e A n SCXI-1127 is required in slot 4 to establish communication with the chassis.
I f slot 4 is empty, the system will not operate. It is this module that you must specify
in the configuration utility as the cabled module to the DMM.
SCXI-1127 User Manual 1-6 © National Instruments Corporation