NI PXIe-5831, Руководство по началу работы

Страница: 13 / 38

Figure 5. Equipment Setup with One mmWave Radio Head (Power Adapter and Cables
Not Shown)
IF IN LO IN IF OUT
12 V
5.0A MAX
+ –
ACCESS ACTIVE
PS TEMP FANS
PXIe-1095
18 17 16 15 14 13 12 11 10 9 8 7
H H H H H
6 5 4 3 2
1
NI PXIe-8880
Embedded Controller
GPIB DRIVE
PWR OK /
FAULT
USER1
USER2
10/100
/1000
ACT/
LINK
10/100
/1000
ACT/
LINK
TRIG
RESET
1
2
DP
PXIe-3622
Vector Signal Up/Down Converter
5–21 GHz
LO2
LO1
AUX 1
LO1 0
mmWave
LO1 1
mmWave
REF
IN
OUT
IN
OUT
AUX 0
IF OUT
mmWave
IF IN
mmWave
DIO
ALL COAXIAL
PORTS 50 Ω
IF IN/OUT
0
1
0
1
0
1
IN
OUT
ACCESS ACTIVE
ESD
SENSITIVE
I/ Q
IN
100
Ω
DIFF
I+
I–
Q+
Q–
I/ Q
OUT
100 Ω
DIFF
I+
I–
Q+
Q–
ESD
SENSITIVE
ACCESS ACTIVE
LO3
800 MHz
OUT
LO2
4 GHz
LO1
3.2 GHz - 8.3 GHz
OUT
ALL PORTS
50 Ω
NI PXIe-5653
Synthesizer
REF IN
10 MHz
.5 V p-p MAX
REF OUT
10 MHz
1.5 V p-p MAX
REF OUT
100 MHz
1.5 V p-p MAX
NI PXIe-5820
Vector Signal Transceiver
Baseband I
Q
, 1.25 GS/s
REF
OUT
I/ Q OUT
PFI 0
DIO
REF
IN
I+
I–
Q +
Q –
ACCESS ACTIVE
ESD
SENSITIVE
50 Ω
100 Ω DIFF
I/
Q
IN
I+
I–
Q +
Q –
100 Ω DIFF
50 Ω
DIO
OUT
2
1
1. SMA (m)-to-SMA (m) Cable, 1 m
2. Mini-HDMI-to-Mini-HDMI Cable
1. Use one of the included 1 m SMA (m)-to-SMA (m) cables to connect the mmRH-5582 IF
OUT connector to the PXIe-3622 IF IN mmWave 0 front panel connector.
2. Use another 1 m SMA (m)-to-SMA (m) cable to connect the mmRH-5582 LO IN
connector to the PXIe-3622 LO1 0 mmWave front panel connector.
3. Use another 1 m SMA (m)-to-SMA (m) cable to connect the mmRH-5582 IF IN
connector to the PXIe-3622 IF OUT mmWave 0 front panel connector.
4. Use the Mini-HDMI-to-Mini-HDMI cable to connect the mmRH-5582 DIO IN connector
to the PXIe-3622 DIO front panel connector. Insert the jackscrew and finger-tighten the
jackscrew to the PXIe-3622 front panel.
5. Connect the AC power supply adapter to the mmRH-5582 power input. Finger-tighten
the locking screws on the power supply connector to the mmRH-5582 using a small flat
blade screwdriver.
6. Connect the mmWave radio head to power by connecting the AC power cable to the
power input on the adapter and connecting the other end to a wall socket.
Connecting Two mmWave Radio Heads to the PXIe-5831
Prior to starting this procedure, connect the first mmWave radio head to your PXIe-5831 as
directed in the
Connecting One mmWave Radio Head to the PXIe-5831 section.
PXIe-5831 Getting Started Guide | © National Instruments | 13