NI PXIe-5831, Руководство по началу работы

Страница: 12 / 38

2. Use the other 152 mm MMPX (m)-to-SMA (m) cable to connect the PXIe-3622 LO1 IN
front panel connector to the PXIe-5653 LO1 OUT front panel connector.
Related Information
Refer to the PXIe-5831 section of the NI RF Vector Signal Transceivers Help for more
information about how to make connections using an external clock.
Connecting mmWave Radio Heads
Depending on the hardware configuration you purchased, complete this section to connect
either one or two mmRH-5582 mmWave Radio Heads to the PXIe-5831.
Skip this section if your configuration does not include a mmWave radio head.
Recommended Torque
Ensure that connectors are torqued to the appropriate level when connecting mmWave radio
heads to the system.
Table 4. Recommended Connector Torque
Connector Type Torque
2.4 mm 0.9 N ∙ m (8 lb ∙ in)
SMA 27 GHz 0.9 N ∙ m (8 lb ∙ in)
Mini HDMI 0.34 N ∙ m (3 lb ∙ in), maximum
Power connector jack 0.34 N ∙ m (3 lb ∙ in), maximum
Connecting One mmWave Radio Head to the PXIe-5831
Complete the following steps to connect one mmRH-5582 mmWave Radio Head to the
PXIe-5831, as shown in the following figure.
12 | ni.com | PXIe-5831 Getting Started Guide