Table 6.
NI 5450/5451 AWG Module Front Panel LEDs
LED
Indications
ACCESS Indicates the basic hardware status of the module.
OFF—The module is not yet functional or has detected a problem with a power
rail.
AMBER—The module is being accessed.
Accessed
means that the device setup
registers are being written to in order to control the device or load waveforms.
GREEN—The module is ready to be programmed by NI-RFSG.
ACTIVE Indicates the state of the module.
OFF—The module is not armed or triggered.
AMBER—The module is armed and waiting for a Start Trigger.
GREEN—The module has received a Start Trigger and is generating a waveform.
RED—The module has detected an error state; this state may indicate a PLL lock
failure or a thermal shutdown condition.
NI 5650/5651/5652 RF Signal Generator Module
The NI 5650/5651/5652 RF signal generator module contains three connectors and two
multicolor LEDs.
Note
The following figure depicts the NI 5652 module front panel, although each
NI 5650/5651/5652 module front panel contains the same connectors and LEDs.
NI PXIe-5673E Getting Started Guide
|
© National Instruments
|
15
