NI PXIe-4304, Процедура калибровки

Страница: 1 / 10

CALIBRATION PROCEDURE
NI PXIe-4304/4305
32 Ch, 24-bit, ±42 V, 5 kS/s or 51.2 kS/s Simultaneous Filtered Data
Acquisition Module
This document contains the verification and adjustment procedure for the National Instruments
PXIe-4304/4305 module.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
PXIe-4304/4305 Verification and Adjustment......................................................................... 3
Test Equipment................................................................................................................. 3
Connecting the TB-4304 .......................................................................................... 4
Test Conditions................................................................................................................. 5
Initial Setup....................................................................................................................... 6
Accuracy Verification....................................................................................................... 6
Adjustment........................................................................................................................ 8
EEPROM Update ............................................................................................................. 9
Reverification ................................................................................................................... 10
Specifications............................................................................................................................ 10
World Wide Support and Services ........................................................................................... 10
Software
Calibrating the NI PXIe-4304/4305 requires the installation of NI-DAQmx on the calibration
system. Driver support for calibrating the PXIe-4304/4305 was first available in
NI-DAQmx 15.1.1. For the list of devices supported by a specific release, refer to the
NI-DAQmx Readme , available on the version-specific download page or installation media.
You can download NI-DAQmx from
ni.com/downloads
. NI-DAQmx supports LabVIEW,
LabWindows™/CVI™, C/C++, C#, and Visual Basic .NET. When you install NI-DAQmx, you
only need to install support for the application software that you intend to use.
ni.com/manuals
Deutsch Français