14
|
ni.com
|
GPIB Hardware Installation Guide and Specifications
Table 3 summarizes the functionality of all the front-panel LEDs on the GPIB-ENET/1000.
Ethernet Connector LEDs
The Ethernet connector LEDs on the back panel, shown in Figure 8, indicate your Ethernet
connection status.
Figure 8.
Ethernet Connector LEDs
The
10/100/1000
LED indicates your Ethernet connection speed.
•
Yellow
—Indicates your network connection is 1000 Mbit/s.
•
Green
—Indicates your network connection is 100 Mbit/s.
•
Off
—Indicates your network connection is 10 Mbit/s, or the Ethernet is not connected if
the
ACT/LINK
LED also is off.
The
ACT/LINK
LED indicates network activity.
•
Steady green
—Indicates you have a network link, but no network activity is detected.
•
Blinking green
—Indicates you have a network link and network activity is detected.
•
Off
—Indicates you do not have a network link.
Software Recognition
In Windows, use the GPIB Ethernet Wizard to add the GPIB-ENET/1000 to your system.
Launch the GPIB Ethernet Wizard from
Start»Programs»National Instruments»NI-488.2
.
Table 3.
GPIB-ENET/1000 LED Descriptions
LED
Description
POWER
Indicates the power cord is connected and the GPIB-ENET/1000 is
switched on.
READY
Flashes green rapidly at startup while booting and acquiring network
parameters. A steady green state indicates the unit is ready for operation.
A steady red or slow red blinking pattern indicates an error occurred.
TALK
Indicates the GPIB-ENET/1000 is configured as a GPIB Talker.
LISTEN
Indicates the GPIB-ENET/1000 is configured as a GPIB Listener.
ACT/LINK
Indicates the GPIB-ENET/1000 detected an Ethernet link and blinks to
indicate network activity.
10/100/1000 ACT/LINK
