cRIO-9052 Operating Instructions
6
ni.com
Complete the following steps to install the cRIO-9052 on the chassis:
1.
Make sure that no power is connected to the cRIO-9052 or the chassis.
2.
Align the controller with the chassis as shown in Figure 3.
Figure 3.
Installing the cRIO-9052 on the Chassis
3.
Slide the cRIO-9052 onto the controller slot on the chassis. Press
firmly to ensure the cRIO-9052 is seated properly on the
reconfigurable chassis.
Refer to the
CompactRIO Reconfigurable Embedded System
Installation Instructions
for more information about installing the
cRIO-9052 onto the chassis.
4.
Using a number 2 Phillips screwdriver, tighten the two captive screws
on the front of the controller to 1.3 N · m (11.5 lb · in.) of torque.
1
cRIO-9052
2
Reconfigurable Embedded Chassis
3
Controller Slot
4
Captive Screws
1
2
3
4
