NI CompactRIO cRIO-9052, Руководство по эксплуатации

Страница: 14 / 19

cRIO-9052 Operating Instructions 14 ni.com
Specifications
StarFabric Communication
Interface ..................................................4 LVDS transmit pairs
4 LVDS receive pairs
Communication rates
Theoretical maximum......................133 MB/s
Typical
1
...........................................50 MB/s
Cabling requirements
Cables ..............................................2 shielded
CAT5 Ethernet cables
Maximum difference between
the lengths of the two cables ...........2.54 cm (1 in.)
Maximum cabling length.................14 m (45.93 ft)
Power Requirements
You must use a National Electric Code (NEC) Class 2 power source with
the cRIO-9052.
Recommended power supply..................48 W secondary,
18 VDC to 24 VDC
Power consumption
cRIO-9052 only ...............................1.5 W, max
cRIO-9052 supplying power
to 8 CompactRIO modules ..............17 W, max
2
Power supply
On power up ....................................9 to 35 V
After power up.................................6 to 35 V
Note The cRIO-9052 powers up only at 9 V or higher, but after it is powered up, it can run
on as little as 6 V.
1
This rate varies depending on your host system specifications, such as processor, RAM, and so on.
2
This is the maximum amount of power that the entire system should consume at the power connector.