Getting Started
Introduction
Thank you for your purchase of the Power2 amplifier.
Your investment in this product speaks volumes about
your uncompromising desire to experience the highest
levels of fidelity from your music and movie collection.
We could wax poetic about the inaudible noise floor,
bandwidth to channel 3 on your television and remark-
able phase accuracy of this amplifier. You can read all
about the specifications all you wish. While some of us
might find that interesting, the real heart of the matter
comes when you sit down and listen to your system. We
feel we have succeeded at the point when you have long
forgotten about the specifications, operating
temperature, or even the fact that you have an amplifier
connected to your system. All the watts, cables and
setup configurations should simply go away, leaving
nothing between you and the music.
Before you begin your journey to audio nirvana, we think
it's important that you invest a few minutes learning about
the proper setup and operation of the Power2. This will
insure your investment is maximized and the beginning
of the bragging rights associated with the pleasure of
possessing the most advanced amplifier on the planet.
We sincerely wish, that from this point forward, this were
the only reason you remember you even own a Power2
at all! Job done.
If you have any technical questions, please visit
nhthifi.com
or call
800-NHT-9993
.
Unpacking
Carefully unpack the Power2 and inspect all the contents.
Store all packing materials for later use, if possible. You
will need the packing materials, if you have to ship your
Power2 unit.
Parts List
- Power2 unit
- 12 volt trigger cable
- RJ45 cable for NHTBus
- This user guide
- Power Cord
- Product Registration Card
5
