background image

6

  Oxygen therapy is a prescription. Flow rates are patient specific. Please 

do not change your flow without consulting your physician.

  This machine is designed to supplement oxygen, not for first aid or to 

sustain life.

  Avoid creating sparks near medical oxygen equipment, including static 

sparks generated by friction.

  Extended use in sub-optimal conditions can affect oxygen purity. This 

may cause oxygen levels lower than the patient requires.

  If you feel your oxygen therapy is not sufficient, please contact your 

physician. DO NOT attempt to change your prescribed liter flow.

 The power plug must be unplugged while the CLINOXX-NHT-10 

concentrator is not in use.

  Contact the physician immediately, if the patient or caregiver finds 

insufficient oxygen supply. Do not adjust the oxygen flow unless directed by 

a physician or healthcare professional.

 Always unplug the CLINOXX-NHT-10 when performing any routine 

maintenance to avoid electric shock.

The CLINOXX-NHT-10 is designed to minimize routine maintenance. Yearly maintenance must be 

performed by an authorized dealer or NHT certified personnel only.

Maintenance

• Do not use while bathing. If the patient requires continuous O2, the CLINOXX-NHT-10 concentrator 

must be placed at least 10 feet from the bathroom.

• Do not touch the oxygen concentrator while wet. Do not use or store this oxygen concentrator near 

liquids or other electrically conductive materials.

• Do not touch the CLINOXX-NHT-10 if it should fall into water or other conductive liquid. If this should 

occur, unplug the power cord immediately.

Water Safety

• The use of portable communication equipment near the oxygen concentrator may cause interference 

to the machine.

• This product cannot be used in environments such as electrocautery, electrosurgery, defibrillation, 

X-ray (gamma ray), infrared radiation and transient electromagnetic fields, including magnetic 

resonance (MRI) and radio interference.

• Portable RF communications equipment (including peripherals such as antenna cables and external 

antennas) should be more than 12 inches from any part of the equipment.

Otherwise, the performance of the device may be affected.

• This oxygen concentrator cannot be stacked with other equipment. This may result in improper 

operation.

Radio frequency interference

Содержание CLINOXX-NHT-10

























Отзывы: