NF WF1943B, Инструкция по эксплуатации

Страница: 140 / 156

8-4
WF1943B
8.2 Output voltage
z Output voltage (FUNCTION OUT)
Output range
Amplitude
Range
Resolution
Accuracy
DC offset (including when DC
voltage is generated)
Range
Resolution
Accuracy
Amplitude and DC offset
limiting
Output
impedance
Load impedance
Output connector
Others
10 V range / 1V range fixed, or automatic switchable
10 V range : 0 mVp-p to 20.000 Vp-p/open
1 V range : 0.0 mVp-p to 2.0000 Vp-p/open
10 V range : 1 mVp-p/open
1V range : 0.1 mVp-p/open
Continuous oscillation.
, 1 kHz, rms value measured
10 V range :
±
[0.7 % of amplitude setting (Vp-p) + 0.05 Vp-p]/open
1 V range :
±
[0.7% of amplitude setting (Vp-p) + 0.01 Vp-p]/open
10 V range :
±
10.000 V/open
1 V range :
±
1.0000 V/open
10 V range : 1 mV/open
1 V range : 0.1 mV/open
DC mode
10 V range :
±
(0.5% of DC offset setting [V] + 0.07 V)/open
1 V range :
±
(0.5% of DC offset setting [V] + 0.01 V)/open
If output voltage exceeds the following value, the OVER light blinks
and the output may be clipped.
10 V range : 11 V/open
1 V range : 1.1 V/open
50
Ω
, unbalanced
45
Ω
and more
Front panel, BNC receptacle (FUNCTION OUT)
Output voltage can be set with high and low level buttons.
z SYNC OUT Output voltage (SYNC OUT)
Output voltage
Output waveform
Rise/fall time
Output impedance
Load impedance
Output connector
0/+5V (open)
2.5 ns
50
Ω
, unbalanced
45
Ω
and more
Front panel BNC receptacle (SYNC OUT)