NF WF1943B, Инструкция по эксплуатации

Страница: 110 / 156

5.2 Units
5-10
WF1943B
(2) Set the unit NAME (e.g., rpm)
① Use the and keys to produce the following display (NAME flashes).
ＵＳＥＲ
ＵＳＥＲ ＵＮＩＴ： ＴＹＰＥ ＮＡＭＥ ＦＯＲＭＵＬＡ
4
② Press the
ENTER
key, then use the
MODIFY
dial and and keys to input the unit name
(e.g., rpm). Up to 4 of the following characters can be used for the unit name.
a b c d e f g h i j k l m n o p q r s t u v w x y z ( s p a c e )
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
! ” # $ % & ’ ( ) * + ,
−
. / : ; < = > ? @ [ ¥ ] ^ _ ` { | }
→ ←
③ After inputting, press the
EXIT
key once to release unit name setting.
(3) Select the FORMULA, for example, (h+n)*m. The setting type (e.g., frequency) is h, n is offset,
and m is the coefficient.
①
Use the and keys to produce the following display (FORMULA flashes).
（ｈ＋ｎ）＊ｍ （Ｌｏｇ（ｈ）＋ｎ）＊ｍ
ＵＳＥＲ ＵＮＩＴ： ＴＹＰＥ ＮＡＭＥ ＦＯＲＭＵＬＡ
4
②
Press the
ENTER
key, then use the and keys to produce the following display
[(h+n)*m flash].
（ｈ＋ｎ）＊ｍ （Ｌｏｇ（ｈ）＋ｎ）＊ｍ
ＵＳＥＲ ＵＮＩＴ： ＴＹＰＥ ＮＡＭＥ ＦＯＲＭＵＬＡ
4
③ This sets the formula to (h+n)*m. Press the
EXIT
key once to release the formula setting mode.