Nexxt Polaris 150, Руководство пользователя

Страница: 24 / 90

Nexxt Solutions – Wireless-N 3G router
24
Figure 3-16 Internet access mode
3.6.2. 3G Preferred
3.6.3. 3G Only
3.6.4 WAN Preferred
3.6.5 WAN Only
Note:
If you opt to use 3G as your primary connection, the device will try 3G access first.
When 3G access fails and WAN access is available, or when no 3G USB modem is inserted,
the device will switch to WAN access automatically.
When the device is successfully connected to the 3G network, it will immediately cancel the
WAN connection to switch back to 3G access.
If you opt to use broadband as your primary connection, the device will try WAN access first.
When WAN access fails, and 3G access is available, the device will switch to 3G access
automatically.
When the device is successfully connected to the WAN network, it will immediately cancel the
3G connection to switch back to WAN access.
The device will only attempt to access the broadband connection. 3G access is disabled in
this mode.
The device will only attempt to connect to 3G. WAN access is disabled in this mode.
When the 3G Preferred or WAN Preferred is selected, the device will connect, disconnect
or switch the access type being used automatically. Please note that the
Connect/Disconnect button (on 3G, PPPoE, PPTP, L2TP) and other related parameters
cannot be manually set.
The device is able to support the switch between 3G and WAN modes as long as the WAN
connection is set to Dynamic IP, Static IP or PPPoE.
1.
2.