Nexxt Solutions - 24 port gigabit switch
Nexxt Solutions - 24 port gigabit switch
Commonly-used method to access the ethernet
With 24 UTP/STP ports available, multiple PCs, printers and other network devices with
RJ45 ports can be connected simultaneously to this switch.
3. Operating modes
This switch comes equipped with four preconfigured operating modes, selectable through
the
Mode select
button found on the front panel.
In order to cycle through modes, press and hold the
Mode select
button for 4 seconds.
LED lights from M1/M2/M3/M4 will all blink once at the same time confirming you are
now in the selection mode. Press the button once until obtaining the desired mode. The
Mode select
M1 Network
cloning
M2 Standard
M3 Port
trunking
M1 Port
isolation
24- Port Gigabit Ethernet Switch
Axis2400R
23 (Uplink)
24 (Uplink)
RJ45
RJ11
Cable/DSL Modem
WAN
LAN
LAN
LAN
LAN
Router
Ethernet
PC1
PC2
PC3
Server
switch will automatically go out of selection mode after 5 seconds and lock in the selected
mode.
•
M1 Networking clone
– Closed flow control on all ports to resolve speed drops in
10/100/1000Mbps mixed networks.
•
M2 Standard
– Open flow control on all ports. Full gigabit switch capabilities in order to be
used as a central switch. This is the default setting.
•
M3 Port trunking
– Ports 23 and 24 act as a link aggregation group (static convergence:
source MAC + destination MAC). Increases uplink bandwidth and reduces uplink
bottlenecks to prevent data congestion.
•
M4 Port isolation
– Ports 1-22 become isolated from each other. Ports 23 and 24 are
the convergence of the upper joint. This mode can isolate broadcast storms, prevent ARP
and DHCP spoofing, enhance network transmission rate and security. This mode is mainly
used for internet cafes, schools, businesses and public networks.
