Nexus RACE BOX, Инструкция по установке и эксплуатации

Страница: 34 / 44

RaceBox English
33
; to 2 seconds.
;
UPDATE_SECONDS_PBS=2
;
;
;
; What does a long press do? Options are:
; MOB - trigger an MOB alarm
; Any number greater than 0 - this will start a countdown timer
; that the RP4N uses for TTB calculation during a starting
sequence.
;
LONG_PRESS=5
;
;
; If you want the RP4N to turn the Nexus countdown timer on, set
; this parameter to 5 or 10. Otherwise, set it to 0;
;
; The Nexus Race Box can only start the Nexus timer counting
down
; from 5 minutes or 10 minutes. So, if you set long press
; to be a 15 minute countdown, the nexus timer will be started
; when the time reaches 10 minutes remaining if you set this
; parameter to 10. If you set it to 5, then the Nexus timer will
; be started when the RP4N timer reaches 5 minutes.
;
; If you set this parameter to a number greater than the long
; press parameter is set to, the nexus timer will never be
; started.
;
USE_NEXUS_TIMER=5
;
;
;
; If you set the RP4N timer to run longer than the Nexus timer,
; (for example, LONG_PRESS = 10 and USE_NEXUS_TIMER=5) you may
; display the time remaining on the RP4N timer in the CFD
; field.
;
; If you set the next parameter to ON then the CFD field will
; display the remaining time, but only until the Nexus countdown
; timer is started. So in this example, the CFD field will count
; down from 10:00 to 5:00 and then the CFD filed will begin
; presenting whatever data was selected below, for example,
; Time To Burn (TTB).
;
; If this parameter is set to any value other than Y, the
; time remaining on the RP4N timer will not be displayed and
; whatever data was selected below will be displayed instead.
;