Nexus FDX-kit, Инструкция по установке и эксплуатации

Страница: 32 / 50

NexusRace SW English
31
Temperature offset
If the temperature is read too high or too low, you may adjust that up or down.
7.2.2 Depth calibration
Transducer offset
The transducer offset is the distance from the transducer to the water surface. The
value entered in this box will be added to the measured depth. If you want to display
the depth from the keel, set a negative value for the distance from the transducer to
the keel. I.e. if the draft of the boat is 1.6m and the transducer is mounted 0,4m below
the surface, the distance from the transducer to the keel is 1,2m Enter the value -1,2m
to get the rading from the keel.
Suppression filter
This function is not yet implemented.