Nexus 21 Transcend Pro, Руководство по установке

Страница: 9 / 25

8
Step 5:
Press and hold the Down button on the Wired Backup Switch and
run the Actuators to their lowest position.
Step 6:
Once the Actuators stop, release the Down button then press and
hold it again until you hear a click from both Actuators. This will initialize
them so they start and stop at the same point.
UP DOWN
Step 4:
Connect the Power Cable to Port AC on
the Control Box and connect the other end to a
Wall Outlet.
Step 3: If the system came with RF Controls, connect the Wired Backup Switch and RF Receiver to Ports A1
& A2 on the Control Box .
If your system came with the CSI Kit, connect just the IR Receiver to Port A1 on the Control Box .
CSI Kit RF Kit