Nexus 21 Transcend Pro, Руководство по установке

Страница: 13 / 25

12
Installing the Mount
For these steps you will need the following parts:
•
Transcend Pro
•
(4) Lag Bolts
•
(4) Lag Bolt Cover Washers
•
(4) Washers
•
(4) Lag Bolt Covers
Step 16: Remove the Knock Out for your power on
the bottom of the Recess Box.
Note: At this point make sure the necessary power
supply is ran to the cutout in the wall for the mount,
TV, and any other components.
Step 17:
Measure Your Shelf Depth [D], if you do not have a Shelf or Mantel proceed to the next step.
Step 17a:
Using shelf depth [D], locate the cell in (Table 1) to determine the [H] (Minimum Clearance)
Step 17b:
Using the shelf depth [D] locate the cell in (Table 2) to determine the [H] (Minimum Clearance)
Note: The Transcend Pro must always be able to lower its full travel with no obstructions.
Note: Mocking the TV up on the mount prior to installation will allow you to determine where the TV will rest
relative to the bottom of the mount. This will ensure the requirements for Table 2 are met and the TV does not
collide with the top of the shelf during downward travel.