Nextron LPM3, Руководство пользователя

Страница: 25 / 36

25
2. New recipe by continue press -
Just like the new recipe editor, complete 1 to 6 steps first, press the 7th item and edit it to load it, match the
continuous press detection data, and import the data directly for editing.
Step -
1) In the continuous press function screen, press the export formula key, if it is not established in the connector
database, it will be required to save it first, then enter the edit recipe page.
2) Enter the serial number of the serial number to be created in the green field of "SAVE RCP" and press it.
3) Import the data into the relative field on the parameter table, and then type the data in the field to enter.
4) When there are multiple identical connectors to build, repeat the second step.
5) To create another connector on the recipe, jump back to the continuously press page, continue setting the
connector parameters, and repeat steps 1~3.
6) After inputting the data of the above fields, the setting of each pressing sequence number is completed, the recipe
table is stored. Click the upper left Save key, enter the file name, the file name is preset as the product part number,
and editing is completed after archiving.
3. Previous recipe edit -
Click the Open button in the upper left corner to select the recipe table that needs to be edited. After the file is
opened, the edit page will bring out the previously set data, and then enter the changes according to the required
pressing sequence and column data, and then archive the file name. For the change, the file name is newly created.
There will be no warning window, and it can also be used in the copy recipe editing of a later version or similar
model.
4. Connector setup -
On the connector database edit page, you can access the connector's data query and single delete operation by
entering the continuous press page or editing recipe page. For the establishment of the connector data, please refer to
the “Continuous Press Setting” function.
5. Query -
As the continuous pressing page, it provides two items for data query, "CONN_SERIES SEARCH" and
"ORIGIN_SERIES SEARCH", with case differences, enter the item number to be queried in the field, the following
data table will follow the input word changes to list the required lines. If the column is blank, the entered item
number has not been created. Two field conditions query will not be performed at the same time. The condition data
will be searched according to the current input field items.
6. Delete -The connector database can be used to delete single data. In the upper right green box, enter the item
to be deleted, and then click the “DELETE 1's DATA” to delete it. This is a permanent deletion.