07
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
08
Caution
●
The product must not get damp or wet. This product is not a toy.
It contains fragile and swallowable glass parts, small parts, and a
rechargeable battery. Any use other than that described above may
damage the product. Read these operating instructions thoroughly
and carefully. The instructions contain important information for
installation, operation, and handling. Take note of all safety
instructions.
Warning
●
A "Li-Poly" (lithium-polymer) rechargeable battery is integrated into
the NSB-25.
This rechargeable battery does not have the so-called "memory effect"
—the rechargeable battery can be charged whenever you want.
Furthermore, it has higher energy content than conventional NiCd and
NiMH rechargeable batteries. Note these important instructions when
handling the Li-Poly rechargeable battery.
The rechargeable battery can be recharged 400 times.
If the battery operation time gets shorter, it may be time to replace
the battery.
Consult your authorized NEXTODI dealer to replace the
battery.
Caution
●
Never damage the rechargeable battery--do not remove it from the
NSB-25. Consult the chapter on "Battery Disposal". Damaging the
wrapping of the rechargeable battery might cause an explosion or fire.
●
Never short circuit the contacts of the rechargeable battery. Never
touch the connections or electrical components inside the NSB-25
with metal objects.
●
Charge the rechargeable battery regularly, even if you do not use the
product. The NSB-25 needs some "current" (a small quantity) at all
times. Due to the Li-Poly rechargeable battery technology, it is not
necessary to discharge the battery before recharging. Recharge the
battery completely, about once every three month, or the battery will
go bad.
Warning
●
The case of the hard disk must not get damp or wet. Protect the
device from humidity and water, from sun, excessive heat (>113°F)
or cold(<32ºF), dust and dirt.
●
When the product is brought from a cold place into a warm room,
condensation may form. This could damage the product. Always let
the product get to room temperature before use or before connecting
the AC power adapter unit. This could take several hours.
●
Do not use in tropical climate conditions.
●
The AC power adapter unit complies with safety class II. As a voltage
source only a proper power socket of the public power supply system
may be used. Note the input voltage/frequency imprinted on the AC
Adapter. It must correspond to the voltage/frequency of the power
outlet. The AC power adapter is equipped with an input voltage range
of 100 ~ 240V, 50/60Hz.
●
The product is not a toy and should be kept out of reach of children.
●
Do not place liquid near the product. Liquid could get inside the
housing and cause a fire or electric shock. In case of fire damage or
short circuit, de-energize the respective socket (e.g. turn off circuit
breaker) and only then pull the AC power adapter unit from the
socket. Do not attempt to use the product! Take it to your dealer for
repair immediately.
●
Never touch the AC power adapter unit when your hands are damp or
wet.
●
In industrial facilities, safety regulations for electrical equipment and
facilities must be observed. If the product is used at schools, training
facilities, or do-it-yourself/hobby shops, it should not be handled
unless supervised by trained, responsible personnel.
●
Do not drop the NSB-25 device.