21
8
A
U
SING
THE
SOFTWARE
-
ASSISTED
METHOD
TO
FIND
THE
STRONGEST
SIGNAL
Note:
It may be beneficial to have two people perform this
procedure. One person will monitor software statistics inside the
house. The other person will rotate the OSU outside the house.
To scan for the strongest signal from your service provider:
1
Install the LinkMonitor program as described in the section
“Installing the LinkMonitor program” on page 19.
2
On the LinkMonitor window, click
Start Scan
.
3
Return to the OSU on the side of the house.
4
Rotate the OSU along the adjustment arch.
5
The LinkMonitor program searches for a signal from your service
provider. In the
Channel
Score
group, the strength of the signal
received at the starting position is indicated in two ways:
•
The indicator bar shows varying levels of red, yellow, and
green. Red indicates weak signal strength, yellow indicates
moderate signal strength, and green indicates strong signal
strength.
•
The
Current
Score
field shows the signal strength. During
this procedure, the program compares the Current Score to
the
Best
Score
. Best Score indicates the strongest signal the
program has ever seen during the scanning procedure.
6
After about five seconds, point the front of the OSU to the right
of the starting position.
7
Rotate the OSU along the arch again.
The software program determines and reports the strength of
the signal that the OSU receives while the OSU is in its current
orientation.
8
After about five seconds, note the strength of the signal received
at its current position.
9
Rotate the OSU along the arch. The program determines and
reports the strength of the signal that the OSU receives while the
OSU is in its current orientation.
Содержание Expedience OSU-2510
Страница 4: ...2 Connecting the OSU to a network 24 FCC information 25...
Страница 7: ...3 Figure 1 shows the OSU Figure 1 OSU...
Страница 8: ...4 Figure 2 shows the network interface manager box Figure 2 NIM box...
Страница 32: ...2...
