18
Figure 13 shows the cables and the ground wire connected inside the
NIM box.
6
C
ONNECTING
GROUND
WIRES
Both the OSU and the NIM box must be grounded to a grounding
rod in the earth near your house. Make sure your grounding rod does
not exceed a 50 feet maximum.
To ground the NIM box and the OSU:
1
Inside the NIM box, unscrew the hex nut labelled GND.
2
Insert one end of the grounding wire through the rubber
grommet on the bottom of the NIM box.
3
Loop the grounding wire around the ground post.
4
Re-tighten the hex nut around the wire to hold it in place.
5
Connect the other end of the grounding wire to the grounding
rod in the ground next to the house.
Figure 13: Cables and ground wire plugged into NIM box
Power cable
Ethernet/power cable
Ground
wire
RJ-45
cable
Содержание Expedience OSU-2510
Страница 4: ...2 Connecting the OSU to a network 24 FCC information 25...
Страница 7: ...3 Figure 1 shows the OSU Figure 1 OSU...
Страница 8: ...4 Figure 2 shows the network interface manager box Figure 2 NIM box...
Страница 32: ...2...
