7
OPERATING THE DEVICE:
Location Instructions
1.
Sending SMS trigger - Location
Send SMS “URL*12345678” to the tracker, “URL” is a command, “12345678” is
password. If the operation is success, the tracker will send back the location
information with map link to the sender. User click the link, the location in a
map will display.
2. Arming the Shock Alarm by sending SMS
Send SMS “ARM*12345678” to tracker, “ARM” is a command, “12345678” is
password, the tracker will send back the information “Set Shock Alarm ON”
to indicate the operation is success and go to arm state, if the password is
incorrect, the operation will fail and the tracker will send back information
“Wrong Password”.
Once shock alarm state is activated, the system will check shock sensor. If
the shock sensor is triggered (only continuous shock can trigger the alarm
to avoid accidental readings), the tracker will send alarm and location
information by SMS to the authorized phone number, and send the alarm
information to the website server. The tracker will call the authorized
number A first, if not answered then B and then C, if 3 authorized calls
go unanswered, the tracker will stop calling. If the tracker is triggered
continually, every authorized phone will receive max 3 alarm SMS per hour.
If the authorized number have been set, use the authorized phone number to
send SMS “ARM#” to the tracker also can trigger the tracker to enter
arm state.
