NextBase 512GW Ultra, Инструкция по эксплуатации

Страница: 24 / 43

VIDEO MODE (CONTD.)
Continued from previous page.
13. GPS Location Stamp
Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files.
When a recording is viewed using the supplied NEXTBASE Replay playback software both the
GPS co-ordinates and speed information remains available.
Options: On and Off
Default Setting: On
12. Model Number Stamp
Turn On / Off the Model Number stamp shown in the bottom left corner of recorded files.
Options: On and Off
Default Setting: On
13. G Sensor
Turn Off or adjust the sensitivity of the built in G Sensor. The G Sensor detects forces which
will automatically protect the current recording in event of a collision.
Note:
- This does not affect Parking mode sensitivity.
Options: High, Medium, Low and Off
Default Setting: Medium
Note:
- Within the Setup Menu which is accessed by pressing the MENU button twice, there is
a ‘Default Settings’ option to allow you to reset the Dash Cam to the factory defaults,
if required.
Video Menu
GPS Location Stamp
Model Number Stamp
G Sensor
Number Plate
Back
MENU
Enter OK
24