STEP 1
Hold the receiver button 1 down (about 5 seconds.) until the
LED begins to Flash
DELETION OF SINGLE
TRANSMITTER
DELETION OF ALL TRANSMITTER
SAVED
5.2 - DELETION OF REMOTE CONTROL
These procedures let you delete from the memory transmitters that have already been programmed.
PASSO 2a
Within 10 seconds make a transmission with the
transmitter that you want to delete.
The LED flashes quickly and turns off.
PASSO 2B
Within 10 seconds press the button 1 on
the receiver for a short time to confirm the
delection of all transmitters.
The LED starts flashing quickly and turns off.
ACTION:
Hold tbutton 1 down
LED:
Flashes red
ACTION:
Make a transmission with the transmitter
LED:
Flashing quickly and turns off
ACTION:
Short press of button 1
LED:
Flashing quickly and turns off
11