2 - CONNECTION DIAGRAMS
RECOMMENDATIONS
•
Installation must be carried out only by professional technicians in accordance with the applicable electrical and
safety regulations.
•
All connections shall be operated without electrical voltage.
•
Use proper cables.
•
Don’t cut the antenna
•
Provide in the power line twith an appropriate disconnection device
•
Dispose of waste materials in full compliance with local law.
•
Do not exceed the specified load limits and use correctly protected power supplies.
2.1 CONNECT THE START CONTACT
Start contact must be connected to the “start contact” of the automation control unit.
WARNING:
•
Contact must be free of voltage
-
+
- = (1)
+ = (2)
NO start contatc = (3)
Common of the contact = (4)
Antenna = (10)
(2)
(1)
(3) (4)
Automation
control unit
Start input
(NO contact)
12 - 32 Vdc
or 12-24 Vac
4
