Produced in China for Next Retail Ltd.
2
Assembly instructions
BEFORE YOU START
Number of people required to assemble
2 persons
to assembly
Time to assemble
1 Hour
Tools required
Missing parts
If you are missing any fixtures and fittings for your
product please contact our customer service team on
0333 777 8999
and they will be happy to arrange for a
replacement to be sent to you free of charge.
Home service technicians
If you have a fault with
your product please contact our
customer service team on
0333 777 8999
. If you have
had the product for 28 days or less you may be offered
a replacement, refund or for a fully trained home
service technician to visit your home to assess the fault
and repair the product where possible. If you have had
the product for more than 28 days we will send an
independent home service technician to review and
repair the product where possible and recommend
further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT
To view our full furniture range please visit
www.next.co.uk
876752
876752-2015-V1
OSBOURNE CONSOLE
Warnings
We suggest you retain these instructions for future reference
Keep fittings out of children's reach and keep children well
away from construction area.
This product should only be used on firm, level ground
Please periodically check all fittings and re-tighten as necessary
Please do not sit or stand on your table
Avoid exposing the furniture to excessive heat or direct sunlight
as this can cause cracking of the wood and deterioration of the
colour
Unwrap all packaging materials and place the components on
top of the carton box or on a clean floor to protect it from
damage
Do
’
s
We suggest you spend a short time reading through this
leaflet before you start
When you are ready to start, make sure that you have the right
tools and plenty of space
Unwrap all packaging materials and place the components on
a clean surface to protect it from damage,
We recommend that the packaging is used to protect the
surfaces during assembly
Carefully check that you have all the parts before beginning
assembly
Due to the size of the product we recommend that it is
assembled in the room intended for use
Ensure the product is fully assembled as illustrated and all
fixings fully tightened before use. Check fixings regularly to
ensure they remain tight
Wood will mellow and change colour over time, we recommend
that ornaments and items placed on the
surface are moved regularly for the first few months to prevent
uneven mellowing.
When cleaning glass panels use a damp cloth with washing up
liquid or soft soap if necessary. Do not
use washing powders or any other substances containing
abrasives since these substances can scratch the glass
Don
’
ts
When moving furniture never drag the pieces across the floor,
as this will cause damage to the joints
Apply Adhesive substrates for example, sticky tape to the product
Do not use silicone based furniture polish. Silicone in furniture
polishes can break down the lacquer finish
If the glass is chipped or broken, stop using the product and
consult Next
Do not place very hot or very cold items on the glass surface,
unless adequately thick table mats are used
to prevent such items from coming into contact with the glass
Do not use glass as a chopping surface. Do not strike the glass
with hard or pointed items
PRODUCT SUPPLIED WITH WALL FIXING STRAPS
